Internal UDP Receiver for Testing Satellite Link to Hub
The IP UDPRECV module receives UDP traffic with embedded packet identification. Missing packets
can be found by looking at the identification, which can be used to check the link issues. UDPRECV can
be configured to work in different ways; it can receive traffic from a single host or two hosts. UDPRECV
will receive traffic until explicitly stopped by the user.
UDP Receiver for Testing the Satellite Link to Hub
For UDP sender testing of the satellite link to hub, follow the below procedure.
1. Configure the port sender for IP address, port number, packet size, packets per second, and
number of packets to be sent as shown here:
To Next Page