Strong SRT 7015 User Manual

27
Parental Lock Set the age limit for a viewer if the viewer is underage. These only functions if a
broadcaster sends an age-signalling for the current programme. You can only
enter the Parental Lock menu by entering your password. The default password
0000
Menu Lock Select either On or O. When On many menu items can only be accessed after
entering the password.
Channel Lock Set to O, channels selected as Lock in the Edit Channel menu, are all accessible
without entering the password. When selected On, these channels are blocked
and need the password to be entered.
New Password To change the default password from 0000 to another password like you wish,
select this option. Enter the new password.
Conrm Password Re-enter your new password to conrm.
Make a note o the new password.
OSD Setting OSD means On Screen Display, all the graphics you will see on screen.
OSD Timeout Set the time (in seconds) the program banner will be shown on screen, when
switching channels.
OSD Transparency Set the amount of transparency the OSD (banners and menu) will have,
superimposed on the running program. 40% is the most transparent option.
Favourite
Here you can rename the default names of the Favourite lists. For example: Movies or Music. Or even the
names of users of the unit with their own dedicated channels. Select the list name you want to edit and
press OK. Use the pop-up keyboard to change the name and select BLUE (OK) to conrm.
Audio Description setting
AD. For the visually impaired, a narrator can describe the actions happening on screen with a dedicated
additional audio track, mixed with the original audio track. This service is provided by some broadcasters
and is therefore subject to availability.
AD Service Select On if you wish to use the service by default on all channels which may
carry an AD track.
Use AD as default Select On if you wish to use the service by default on all channels which may
carry an AD track.
AD Volume Oset Set the balance of volume the AD audio track will have, mixed with the original
audio track.
Auto Standby This feature is implemented for power saving. The receiver will turn to Standby
automatically if no command from the remote is received for the selected time
period. Default is 3 hours. It can also be turned O.NOTE: If there are timers
running, the auto standby function will be disabled for the booked time.
Tools
This menu provides some technical options for the working of the unit.
Information Read the technical details of your receiver, like model number, Software/
Hardware version and serial number. This information could be asked during a
service call or repair request.
Factory Setting
Reset your receiver to the default factory settings.
Enter your password or the default password 0000, select Yes and press OK to conrm.
The receiver will reboot and start with the First Installation menu.

Strong SRT 7015 Specifications

General

Flash memory	4 MB
Internal memory	64 MB
Signal source	Satellite
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
AC input voltage	100 – 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	- W
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
AC adapter included	Yes
Ethernet LAN	No
Tuner type	Digital
Demodulation	8PSK, QPSK
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus
Frequency range	950 - 2150 MHz
Number of tuners	- tuner(s)
Channels quantity	2000 channels
Audio output channels	2.0 channels
Digital Satellite Equipment Control (DiSEqC)	1.2, 1.3
Composite video out	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio formats supported	AC3
Video formats supported	H.264, MPEG2, MPEG4

Weight and Dimensions

Depth	41 mm
Width	171 mm
Height	104 mm
Weight	260 g