IInnttrroodduuccttiioonn
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
CCAAUUTTIIOONN
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
NNoottee
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
PPrroodduucctt ddeessccrriippttiioonn
The Stryker Model 6390 PPoowweerr--LLOOAADD® power-loading cot fastener system is designed to lift, lower, or steer compatible
ambulance cots into and out of an emergency ground transport vehicle. When the cot is securely attached to the system, a
battery powered hydraulic system assists the operators in loading and unloading a cot. The system also secures the
compatible ambulance cot within the vehicle for patient transportation purposes. When the cot is secured in the transport
position, PPoowweerr--LLOOAADD inductively charges compatible Model 6506 PPoowweerr--PPRROO™ XT and 6516 PPoowweerr--PPRROO™ IT
ambulance cots. In the event of power loss, the system remains functional for securing the cot within the vehicle.
IInnddiiccaattiioonnss ffoorr uussee
PPoowweerr--LLOOAADD is intended to assist with loading and unloading of a compatible wheeled stretcher (ambulance cot) to and
from a transport vehicle and to secure the ambulance cot during transport. The device has a maximum safe working load of
870 lb (395 kg), which includes the weight of the ambulance cot, patient, and equipment attached to the cot (such as
oxygen bottles, monitors, and pumps). The intended users of the device are trained professionals, including emergency
medical service and medical care center personnel, as well as medical first responders, service technicians and installers.
CClliinniiccaall bbeenneeffiittss
Cot: patient transport
Fastener: support cot for transport
Cot and fastener system: support and transport patients
6390-709-001 Rev AB.1 7 EN
To Next Page
Loading...
Need help?
General
