87
Settings
English
Time limit to reset O
2
mix to air
1. Confirm that you wish to change the time limit of the reset by pushing . The current setting
starts to flash.
2. Change the time limit by pushing or .
(1 - 48hrs or no reset: “– – h”)
3. Confirm the selected value with .
Enabling two-gas diving
1. Confirm that you wish to enable two-gas diving by pushing . “On” or “off” starts to flash.
“On” indicates the deco gas is active, “off” indicates that only gas 1 will be used for decompression
calculations.
2. Switch between “on” and “off” with
.
3. Confirm your choice with
.
PDIS (Profile Dependent Intermediate Stop)
1. Confirm that you wish to enable PDIS by pushing . “On” or “off” starts to flash.
“On” indicates that the PDIS timer will be automatically activated during the dive, “off” indicates that
PDIS will be inactive.
2. Switch between “on” and “off” with
.
3. Confirm your choice with
.
Selecting the units
To Next Page
Loading...
