29COMPONENT DESCRIPTION
3.4.2 PRESSURE RELIEF VALVE
The pressure relief valve will open to relieve excess pressure in the sump tank if the pressure exceeds the set
3.4.3
feature helps to protect the compressor unit from being run in reverse rotation for an extended period of
3.4.4
3.4.5
3.5 AIR/OIL DISCHARGE SYSTEM
removed by the separator collects the bottom pan of the element and is returned to the low pressure side
Once the minimum pressure is met, the minimum pressure valve will allow air to pass through to the
in temperature condenses the water so that it can be removed by a water separator equipped with an
3.5.1
3.5.2
WARNING! DO NOT REMOVE STAPLES! The air/oil separator is supplied with staples in the gaskets to ground the
separator to the sump tank in order to prevent ash res created by build-up of static electricity.
3.5.3 MINIMUM PRESSURE VALVE
The minimum pressure valve maintains the minimum pressure in the sump tank necessary to circulate
To Next Page
Loading...
