44 OPERATION
5.5 NORMAL STOP
1.
2.
3. Turn the selector switch to the OFF
5.6 RESTARTS
If the compressor shuts down unexpectedly, special procedures must be followed to safely restart the
5.6.1 POWER FAILURE
1.
2.
3. Follow 5.4 Normal Start
5.6.2 MOTOR TRIPPED OVERLOAD RELAY
1.
2.
3.
4. Follow 5.4 Normal Start
WARNING! Never adjust the overload relay higher than motor nameplate service factor amperage, as an unsafe
condition will result!
To Next Page
Loading...
