62
8.4 COMPRESSOR LUBRICANTS
FACTORY FILL
Palasyn 45
NOTE! Fluid Life vs. Operating Temperature is only a guideline for typical oil life if temperature is the only variable
to be considered. See chart 8.4.8 Oil Coolant Life vs. Operating Temperature on page 65. Many variables
aect the oil life, i.e., environmental impact from various gases, dust and dirt, compressor short cycling, etc.
Changing
uid once a year may not be adequate or it can be excessive. For this reason an hourly service on lubricants
is merely a guide. Please consult your factory-trained servicing distributor for questions concerning your
lubricant life and Sullivan-Palatek’s lubricant sampling program. See 6.6 Oil Sample for Analysis on page
43 for additional information.
PALASYN 45
Palasyn 45 is designed for 4500+ hours of use in rotary screw compressors operating in good conditions at
CHARACTERISTICS
»
» Excellent anti-wear performance
» Compatible with most seals, plastics and rubbers
» Wide operating temperature range
» Non-detergent
» Excellent water separation
»
» Compatible with most mineral and synthetic oils
FLUID LIFE
»
ORDERING OPTIONS
DESCRIPTION PART NUMBER
LUBRICANT, PALASYN 45, 5 GALLON PAIL 00061-005
LUBRICANT, PALASYN 45, 55 GALLON DRUM 00061-055
CHARACTERISTICS
» Outstanding thermal and oxidative stability
» Extended drain intervals reduces oil disposal
» Wide operating temperature range
» Excellent anti-wear protection
» Compatible with most compressor oils
»
To Next Page
Loading...
