50 MAINTENANCE
SAMPLE OIL FROM SUMP TANK
1. Run the compressor long enough to reach normal operating
2. Follow 6.3 Stopping for Maintenance
3. Remove the drain plug from the end of the drain line at the bottom
4.
5.
6.
7. Start the compressor according to 5.4 Normal Start
to 6.5.2 Fill
FILL SAMPLE BOTTLE
1/3 MINIMUM
SUBMIT OIL SAMPLE
1.
2.
3. Mail the sample with the form to:
Wear Check
501 Madison Avenue
Cary, NC 27513
INTERPRET RESULTS
Once the sample is processed the laboratory will e-mail the results
includes customer unit information, sample data, spectrochemical
analysis, physical properties, additional test results and analysis
assist in understanding the analysis report is included on the front of
1)
(2)
MAIL ANALYSIS KIT
To Next Page
Loading...
