SummaSign Pro T-series Cutters User’ s Manual
General Information 1-10
1.4. REAR PANEL COMPONENTS
In order to get acquainted with your SummaSign Pro cutter, read the following
description of the rear panel components. Figure 1-1 shows the location of the
main components.
FIGURE 1-1 :
SUMMASIGN PRO T-SERIES CUTTERS, REAR VIEW*
FOR PRACTICAL REASONS, ILLUSTRATIONS RELATE TO THE T750 PRO MODEL. ALL MEMBERS OF THE
PRO T-SERIES CUTTERS ARE SIMILAR EXCEPTING IN WIDTH.
To Next Page
Loading...
