xii Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
I.8 Mounting the New File System I–8
I.9 Verifying That the New File System Is Mounted I–9
I.10 Determining the World Wide Name for IBM Servers Running AIX I–9
J. Configuring an HP Server Running the HP-UX Operating Environment J–1
J.1 Setting Up a Serial Port Connection J–2
J.2 Accessing the Firmware Application From an HP Server
Running HP-UX J–3
J.3 Attaching the Disk Array J–5
J.4 Logical Volume Manager J–6
J.5 Definitions of Common Terms J–6
J.6 Creating a Physical Volume J–7
J.7 Creating a Volume Group J–7
J.8 Creating a Logical Volume J–10
J.9 Creating an HP-UX File System J–10
J.10 Mounting the File System Manually J–10
J.11 Mounting the File System Automatically J–11
J.12 Determining the World Wide Name for HP-UX Hosts J–12
K. Configuring a Windows NT Server K–1
K.1 Setting Up the Serial Port Connection K–2
K.2 Accessing the Firmware Application From a Windows NT Server K–5
K.3 Enabling a Windows NT Server to Recognize New Devices and LUNs K–5
K.4 Determining the World Wide Name for Windows NT Servers K–9
To Next Page
Loading...
Need help?
General
