Sun Microsystems StorEdge 3000 Series - Sun Storedge 3510 FC Array Default Single Controller SFP Placement; FIGURE 4-15 Sun Storedge 3510 Jbod;Expansion Unit Default SFP Placement

Chapter 4 Connecting Your Fibre Channel Array 4-17
FIGURE 4-13 Sun StorEdge 3510 FC Array Default Single Controller SFP Placement
FIGURE 4-14 Sun StorEdge 3511 FC Array Default Single-Controller SFP Placement
In a default Sun StorEdge 3510 FC expansion unit, SFPs are initially plugged into the
left-most port of the upper I/O expansion module and right-most port of the lower
I/O expansion module (see
FIGURE 4-15).
FIGURE 4-15 Sun StorEdge 3510 JBOD/Expansion Unit Default SFP Placement
Host port FC0
Host port FC1
Host port FC4
Host port FC5
Host port FC1
H/D/RCC
Host port FC0
Host port FC4
Host port FC5
Default SFP Placement