Sun Microsystems StorEdge 3000 Series User Manual

6-46 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
5. Select a logical drive (LD).
The partition table is displayed.
6. Select a partition.
A menu displays Map Host LUN and Create Host Filter Entry.
7. Choose “Create Host Filter Entry → Add from current device list.”
This step automatically performs a discovery of the attached HBAs. Alternatively,
you can add them manually.

Sun Microsystems StorEdge 3000 Series Specifications

General

Brand	Sun Microsystems
Model	StorEdge 3000 Series
Category	Storage
Language	English