SUNFAR C300 79
C300 series of non-sensor current vector-control inverter manual
They are closed loop control parameters about rotational speed and used to set.
Arithmetic of vector control. Generally, they need modify by professional person.
It is read-only parameter for user. Rectify coefficient of dead zone can be modify by
parameter F1.20 only.
It is read-only parameter.
FC.7 Reserved
FC.8 Agency password Setting range： 0~ 9999
FC.9 Rotational speed coefficient Setting range： 0.10 ~ 5.00
FC.10 Gain of closed loop of rotational speed Setting range： 0.50 ~ 1.20
FC.11 Integral time constants of closed loop of rotational speed
Setting range：0.10 ~ 10.00
FC.12 Compensation rectify of dead zone Setting range： 0 ~ 25
FC.13 Program version Range: 2000 ~ 2099
To Next Page
Loading...
