To Next PageTo Next PageHow to fix error in thread tightening on SunStar SPS/C-B1201?
If you're experiencing an error in thread tightening with your SunStar Sewing Machine, it might be due to weak tension in either the upper or lower thread. Try readjusting the tension of both threads. Also, improper timing between the needle and shuttle can cause this issue, so readjust the timing for the needle and shuttle.
What causes needle breaks on a SunStar SPS/C-B1201 Sewing Machine?
If your SunStar Sewing Machine is experiencing needle breaks, there are several potential causes. The needle itself might be damaged (bent, cracked, or with a distorted tip), so try replacing it. It's also possible the needle was installed incorrectly, so ensure it is properly installed. Finally, the needle might be contacting the shuttle, so control the clearance between the needle and the shuttle.
How to troubleshoot errors in trimming on SunStar Sewing Machine?
If you're experiencing errors in trimming with your SunStar Sewing Machine, it could be due to a few reasons. The crossing tension between the movable and fixed blades might be loose, so try adjusting the tension of the fixed blade. Another possibility is that the blade edges of the movable and fixed blades are worn, in which case you should replace both blades. Lastly, the trimmer cam might be in the wrong position, so adjust its position accordingly.
What causes errors in thread tension on SunStar SPS/C-B1201?
If you're getting errors in thread tension on your SunStar Sewing Machine, it could be due to weak tension in either the upper or lower thread. Try adjusting the tension of the upper and lower threads accordingly. Another potential cause is incorrect timing of the needle and the shuttle, so adjust the timing of the needle and shuttle.
General| Brand | SunStar |
|---|---|
| Model | SPS/C-B1201 SERIES |
| Category | Sewing Machine |
| Language | English |
Guidelines for safely transporting the sewing machine.
Safety precautions for installing the sewing machine.
Essential safety procedures for operating the sewing machine.
Identification and purpose of safety features on the machine.
Guide to properly lubricating the sewing machine.
Steps for correctly inserting and securing the sewing needle.
Instructions for threading the upper thread through the machine.
How to insert and prepare the bobbin and lower thread.
Procedures for installing and removing the bobbin case.
Adjusting thread tension for optimal sewing results.
How to adjust the vertical position of the needle bar.
Procedures for aligning the needle and shuttle for proper stitching.
Adjusting the presser foot height for different materials.
Lists common problems related to machine parts and their solutions.
