Supvan TP76E - Page 54

SUPVAN Chapter 8 Others
54
Act without print content
Print head does not
connect correctly
Connect the print head
correctly
Print head is damaged
Please replace it.
Label sticks to cutter
Half-cut is too deep
Select a smaller half-cut
depth.
Adhesive on blade
Clean the blade
Ribbon is out of way and
curled
Tube adjuster
Replace the tube adjuster
Ribbon
Replace the ribbon
Roller is wrapped with
label
Rubber is left on label
surface
Press [Rev Feed] to take it
out
Print media are not fed
External force on tube
Ensure the tensile force on
tube is no more than 5.0N.
Otherwise, the printer will
not feed media
successfully.
Roller is not clear
Please clean the roller.
Foreign body in channel
Clean the channel