396-4412Y1 QuickDraw 3000 Operator’s Manual 25 Revised 02/20/2020
Edit Recipe Help Screen
Recipe:
Clicking on Recipe Name allows you to Select, Delete, Edit, or Create a Recipe.
Calculation Mode:
Depending on the selected mode, the user can change acres, volume, and app rate to calculate load
size and product totals.
Tote:
Touching one of the Totes gives the user the ability to change the product corresponding to that Tote.
Rate:
The amount (in the selected Rate Units) that will be applied. Click on the Rate box to set the rate for that product.
Rate Units:
Select the units to be used for the application rate.
Load Order:
Specifies the order in which the products will be loaded in this recipe.
Volume Units:
Set the units to be used for calculating the amount of product used. This amount will be shown in Volume.
Prod Rinse:
The amount of thime that the product valve manifold will be rinsed between products.
Final Rinse:
The amount of time that the product valve manifold will be rinsed after the final product has been added.
Acres/Volume/App Rate:
Change these to adjust product and load totals.
To Next Page
Loading...