99
KEY FOB
When receiving signals from the keyless control unit, key fob
transmits ID codes to keyless control unit.
By pressing the key fob button for a longer time, the communica-
tion mode can be switched between transmittable (Unlock) and
non-transmittable (Lock) modes.
Switching the key fob function
How to lock the key fob function:
If the key fob function is unlocked, press the lock button on the
key fob for about one second until the red LED on the key fob
blinks once.
How to unlock the key fob function:
If the key fob function is locked , press the lock button on the key
fob for about one second until the red LED on the key fob blinks
once.
NOTE:
To confirm whether the key fob function is locked or
unlocked, press the lock button on the key fob briefly
and check the blinking time of the red LED on the key
fob.
The LED blinks short when it is locked, and it blinks
longer when it is unlocked.
Lock button
Red LED
To Next Page
Loading...
