65
SPC SYSTEM ELECTRONIC CALIBRATION
To perform electronic calibration, a battery powered personal
computer and the Suzuki Diagnostic System software Version
8.20/hardware must be used.
For the Suzuki Diagnostic System Version 8.20 operation, refer
to “Suzuki Diagnostic System Version 8 Operation Manual.”
Required tool
The necessary tools are as follows.
Improper electronic calibration of the system will
make this product and/or the system inoperable or
unsafe for use.
Electronic calibration is required before use. After
installation of this product, the Suzuki Precision Con-
trol System requires electronic calibration, which
should be performed only
by a person who has been
specifically trained in the Suzuki Precision Control
system.
Tool name Part number Q’ty
Suzuki Diagnostic System soft-
ware Version 8.20 set
1
• Diagnostic harness 1
• USB adapter 1
•USB cable 1
To Next Page
Loading...
