Suzuki DF350A - Troll Mode Switch

39
TROLL MODE SWITCH
INSTALLATION
(1) Using hole saw and drill bit, drill hole through the dash
panel at the location (X) shown.
Required tool
• 52.2 mm (2-1/16 in.) Hole saw
• 3.5 mm (9/64 in.) Drill bit
• Electric drill
(2) Connect the leads, matching their color, as shown in the
illustration. (Refer to next page.)
(3) Attach the panel to the dashboard with the screws.
Troll mode switch
Panel
Screw
1
2
3
4 × ø 3.5 mm
(9/64 in)
ø 52.2 mm
(2–1/16 in)
50 mm
(1.97 in)
50 mm
(1.97 in)