7
OUTBOARD MOTOR INSTALLATION
HORSEPOWER SELECTION
NOTE:
• State the maximum horsepower outboard motor that can be safely used on that boat. There is severe
product liability potential connected with rigging and selling a boat with an outboard motor exceeding the
horsepower capacity limitation.
• The rig should not be underpowered, as this will not allow the performance balance you are trying to
achieve. Determine the customer’s needs, application and use of the perspective rig to make the best
overall horsepower recommendation.
MOTOR DIMENSIONS
Overpowering your boat may cause operating/handling difficulties which could result in a crash.
The boat may also sustain hull damage or other damage due to stress.
• Do not overpower your boat.
• Never install an outboard motor with horsepower exceeding the boat manufacturer’s recom-
mended maximum horsepower.
710 (28.0) X: 1165 (45.9), XX: 1282 (50.4)
180 (7.1)
794 (31.3)
X: 1956 (77.0), XX: 2083 (82.0)
X: 634 (25)
XX: 761 (30)
X: 227 (8.9)
XX: 278 (10.9)
X: 36 (1.4)
XX: 36 (1.4)
890 (35)
1206 (47.5)
407 (16.0)
81
(3.2)
12˚
71˚
4˚
15˚
32˚
499 (19.6)
281 (11.1) 281 (11.1)
499 (19.6)
Unit : mm (in.)
32˚
FORWARD
To Next Page
Loading...
