83
MULTI FUNCTION GAUGE SYSTEM CONNECTION
Select the connection method from the examples in the following
pages and arrange the required wiring.
NOTE:
For setting up the multi-function gauge, refer to “INSTALLATION
INSTRUCTION MANUAL” packed in the gauge.
T- Connector
T-Connectors must be connected to be in a straight line as
shown in the illustration.
NOTE:
• Secure the T-connectors to a solid surface or to an existing
wire harness, do not leave them free-floating.
• Do not overstress cables or connectors by using excessive
force when tightening or pulling.
To Next Page
Loading...
