92
KEYLESS START SYSTEM
NOTICE
NOTE:
The keyless start system communicates between the key-fob
and the keyless control unit by means of a radio wave to control
the system.
The keyless control unit must not be installed in a location that
hinders communication with the system.
For example, being placed behind a metal cover or enclosure.
The keyless start system emits a low-power radio
wave from the system control unit.
• If you have a pacemaker or cardioverter defibrillator
(ICD) implant, do not let the pacemaker or ICD come
within 22 cm (9 in.) of the keyless system transmit-
ter. The radio wave may affect the function of the
pacemaker or cardioverter defibrillator (ICD).
• If you use any electro-medical apparatus other than
a pacemaker or cardioverter defibrillator (ICD),
please contact the electro-medical apparatus manu-
facturer regarding the influence of the keyless start
system radio wave on your electro-medical appara-
tus.
Installing and routing the harness of the keyless start
system components in an inappropriate location can
result in system failure.
Be sure to take the following precautions:
• Avoid installing the keyless control unit where it will
be exposed to direct sun.
• Install the keyless control unit in a dry location, as
far as possible from where it might get splashed with
water.
• Install the keyless control unit so that the connector
faces downward.
• To avoid malfunction of the Keyless start system
caused by radio waves, antennas, or coaxial cables
of the radio, install navigation and other equipment
more than 50 cm (20 in.) away from the keyless con-
trol unit.
To Next Page
Loading...
