106
How to register the second key-fob ID code
(6) Make sure the second key-fob is placed less than 0.3 m
(12 in) from the keyless control unit.
The first key-fob must be separated more than 1 m (3.2
feet) from the keyless control unit, or lock the first key-fob
function by operating its lock button.
(7) Using the same procedure that was used for registering the
first key-fob, register the second key-fob ID code by operat-
ing the main switch knob and the second key-fob.
(8) To confirm the key-fob registration was successful:
(a) Turn the main switch knob from “Neutral” to “ON &
OFF” and release it.
The buzzer emits two (2) short beeps and the green
LED in the “SELECT” switch of the control panel turns
on.
At this time, the keyless control unit and the ECM become a
pair.
NOTE:
For multiple engine applications, the instance setting must be
completed before this first key-on action.
To Next Page
Loading...
