1
FOREWORD
This outboard motor has been designed and produced utilizing Suzuki’s
most modern technology. The finest product, however, cannot perform prop-
erly unless it is correctly assembled and serviced. This set-up manual has
been produced to aid you in properly assembling and servicing this outboard
motor.
NOTE:
This set-up manual has been prepared exclusively for the following models.
Applicable model and effective serial number:
35001F (DF350A)-810001 and later
* This manual has been prepared on the basis of the latest specifica-
tions at the time of publication. If modifications have been made
since then, differences may exist between the content of this manual
and the actual outboard motor.
* Illustrations in this manual are used to show the basic principles of
operation and work procedures and may not represent the actual
outboard motor exactly in detail.
* This manual is intended for those who have enough knowledge and
skills to service SUZUKI outboard motors. Without such knowledge
and skills, you should not attempt servicing by relying on this manual
only. Instead, please contact your nearby authorized SUZUKI out-
board motor dealer.
Apprentice mechanics or do-it-yourself mechanics that don’t
have the proper tools and equipment may not be able to properly
perform the services described in this manual. Improper assem-
bly and/or servicing may result in injury to the mechanic and may
render the engine unsafe for the boat operator and passengers
.
Improper electronic calibration of the system will make this prod-
uct and/or the system inoperable or unsafe for use.
Electronic calibration is required before use. After installation of
this product, the Suzuki Precision Control system requires elec-
tronic calibration, which should be performed only
by a person
who has been specifically trained in the Suzuki Precision Control
system.
© COPYRIGHT SUZUKI MOTOR CORPORATION 2017
To Next Page
Loading...
