18
NOTE:
The position of the detent adjust screw 5 is as shown in right
figure.
5. Loosen the lock nut(s) 6 while holding the adjust screw(s)
5.
Turn the adjust screw(s) with a hexagon wrench.
Turning the adjust screw clockwise:
detent force will increase
Turning the adjust screw counterclockwise:
detent force will decrease
a: Hex. wrench
NOTE:
Adjustment of detent force for the dual control lever can be
made independently as shown in right figure.
6. To fix the adjustment, tighten the lock nut 6 while holding
the adjust screw.
a: Hex. wrench
7. After the adjustment has been made, reinstall to the original
position the parts that have been removed (upper cover,
grommet, etc.).
SINGLE LEVER CONTROL
DUAL LEVER CONTROL
To Next Page
Loading...
