81
(3) The following BCM INITIALIZATION-CAUTION window appears.
Read the messages and follow the instruction. Then click the “OK” button and proceed to the next step.
To cancel BCM information deletion, click the “Cancel” button or press the “Esc” key on the keyboard.
(Keyboard) To delete BCM information, move to the “OK” button by using the “Tab” key and press the
“Enter” key to have the deletion accepted. To cancel BCM information deletion, move to the “Cancel”
button by using the “Tab” key and press the “Enter” key to have the cancellation accepted.
(4) The following window appears:
Clicking the “Yes” button deletes BCM informa-
tion.
Clicking the “No” button cancels BCM informa-
tion deletion.
NOTE:
• By clicking the “OK” button, the initialization of
BCM information is completed. Click the “OK” but-
ton, turn “OFF” the engine switch (main switch)
and turn it “ON” again.
• If the initialization of BCM information fails, an
error message is indicated.
• Click the “OK” button and start from the step 1
again.
To Next Page
Loading...
