ENGINE 3-63
• Apply a small quantity of THREAD LOCK to the bearing
retainer screws
8 and gearshift arm stopper bolt
9.
• Tighten the bearing retainer screws
8, gearshift arm stopper
bolt
9 and gearshift fork shaft retainer plug
0 to the specified
torque.
& 99000-32050: THREAD LOCK “1342” or equivalent
* 99000-32030: THREAD LOCK SUPER “1303”
or equivalent
# Gearshift arm stopper bolt: 19 N·m (1.9 kgf-m, 13.5 lb-ft)
Gearshift fork shaft retainer plug:
35 N·m (3.5 kgf-m, 25.5 lb-ft)
OIL JET
Removal
• Remove the piston cooling oil jets
1 and oil jets
2 from the
upper crankcase.
• Remove the oil jets
3 (for front and rear cylinder head side).
To Next Page
Loading...
