VCR functions Others Español
Recording
Playing discs Editing
Before you start
Connections Getting started
Changing the Setting menu
Setting the clock (cont’d)
Getting started
23
Manual Clock Setting
1
Hit [SETUP].
Easy Setting Menu or Advanced
Setting Menu will appear.
2
Using [K / L], select “Clock”.
Hit [ENTER].
When entering from Advanced
Setting Menu, Clock menu will
appear.
3
When entering from
Advanced Setting Menu,
using [
K / L], select “Clock
Setting”. Hit [ENTER].
A clock setting window will
appear.
Hit [ENTER] again.
Default date will appear.
4
Using [K / L], enter the date
(month / day / year).
Press [{ / B] to move the cur-
sor.
5
Using [K / L], enter the time
(hour / minute).
Press [{ / B] to move the cur-
sor.
6
Press [K / L] to select AM or
PM. Hit [ENTER].
Clock menu will appear, then the
settings will be activated.
Although seconds are not dis-
played,
they will be counted from
zero.
7
Hit [SETUP] to exit.
Note
•
Your clock setting will be lost
if either there is a power fail-
ure or this unit has been
unplugged for more than 30
seconds.
To Next Page
Loading...
