12. CRANKCASE / CRANKSHAFT
12-3
Crankcase Disassembly
Remove the cam chain setting plate, and then
remove cam chain.
Loosen the bolt and remove the tensioner.
Loosen 2 bolts on the right crankcase.
Loosen 4 bolts on the left crankcase.
Place right crankshaft case downward and left up
crankcase.
Caution
Care should be taken not to damage the contact
surfaces.
4 bolts
Cam chain setting plate
Tensioner
6 R/L. crank disassemble/install tool
2 bolts
To this chapter contents
To Next Page
Loading...
