4. FUEL SYSTEM
4-10
Fuel Tank
Fuel unit removal
Open the seat.
Remove the luggage box (6 bolts and 1 screw).
Remove rear carrier (4 bolts).)
Remove body cover.
Disconnect fuel unit connector.
Remove fuel unit (4 screws).
Caution
․Do not bend the float arm of fuel unit
․Do not fill out too much fuel to fuel tank.
Fuel unit inspection. (Refer to electrical equipment
chapter 17)
Fuel unit installation
Install the gauge in the reverse order of removal.
Caution
Do not forget to install the gasket of fuel unit or
damage it.
Fuel tank removal
Remove the Fuel cut valve assembly and Fuel
tube.
Remove fuel tank (4 screws).
Installation
Install the tank in the reverse order of removal.
Fuel unit connector
Fuel cut valve
Fuel tube
4 bolts
To this chapter contents
To Next Page
Loading...
