18. ELECTRICAL SYSTEM
18-11
Light / Bulb
Replacing bulb for headlight
Remove the front cover.
Disconnect the terminal coupler from the
headlight.
Remove the headlight bulb.
Replace with new bulb if necessary.
Caution
y Never touch the bulb with finger, which will
create a heat point.
y Clean the fingerprint left on the bulb with
alcohol.
Install the bulb of the headlight in reverse order of
removal.
Upon completion of replacement, turn on the main
switch to ensure the headlight works well.
Adjust the beam and distance of the headlight if
necessary.
To this chapter contents
Headlight couplers
Headlight adjustment screw
Headlight bulb
Position light
Headlight bulb
To Next Page
Loading...
