Symbol DS3578 - RS-232 Default Parameters

RS-232 Interface 8 - 3
RS-232 Default Parameters
Table 8-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the parameter descriptions section beginning on page 8-4.
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 8-1 RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard RS-232 8-6
Baud Rate 9600 8-7
Parity None 8-8
Check Receive Errors Enable 8-8
Stop Bit Select 1 Stop Bit 8-9
Data Bits 8-Bit 8-9
Hardware Handshaking None 8-10
Software Handshaking None 8-12
Host Serial Response Time-out Minimum: 2 sec 8-14
RTS Line State Host: Low RTS 8-15
Beep on <BEL> Disable 8-15
Intercharacter Delay Minimum: 0 msec 8-16
Nixdorf Beep/LED Options Normal Operation 8-17
Ignore Unknown Characters Send Bar Code 8-18