Maintenance and Technical Specifications 3 - 5
Technical Specifications
Table 3-2
Technical Specifications - Scanner
Item Description
Physical Characteristics
Dimensions:
Height
Width
Depth
7.34 in. (18.65 cm)
4.82 in. (12.25 cm)
2.93 in. (7.43 cm)
Weight 13.79 oz. (391 grams)
Performance Characteristics
Roll/Pitch/Yaw SR/HD/DP Configurations: ±360, ±65, ±60
ER Configuration: ±360, ±60, ±60
Laser 650nm laser diode
ESD 15 kV air discharge
8 kV contact discharge
Radio Bluetooth, Up to 100 meters/300 ft. in open air range/environment
Serial Port & HID Profiles
2.402 to 2.480 GHz Adaptive Frequency Hopping
(co-existence with 802.11 wireless networks)
Basic Data Rate: 720 kbps
Enhanced Data Rate (EDR) for image transfer.
Beeper Tone User-selectable: Three tones
Minimum Element Width 5 mil (0.127 mm)
Symbology Decode Capability
1D UPC/EAN and with supplementals, Code 39, Code 39 Full ASCII,
Tri-optic Code 39, GS1 DataBar Variants, GS1-128, Code 128,
Code 128 Full ASCII, Code 93, Codabar (NW1), Interleaved 2 of
5, Discrete 2 of 5 MSI, Codell, IATA, Bookland EAN, Code 32
PDF417 (and variants) PDF417 (Standard, Macro), MicroPDF417 (Standard, Macro),
Composite Codes (CC-A, CC-B, CC-C)
Postal U.S. Postnet, U.S. Planet, U.K. Postal, Japan Postal, Australian
Postal, Dutch Postal, 4State Postal
DPM Marks
(DPM unit only)
Datamatrix marks applied by dot-peening. All supported bar code
types listed above marked by laser etching, chemical etching, ink
marking, molding, stamping or casting methods on surfaces such
as including metal, plastic, rubber or glass
2D TLC-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC
200 (Standard, Inverse), QR Code (Standard, Inverse, Micro)
To Next Page
Loading...
