Radio Communications 4 - 23
FIPS Mode
Parameter # F1h E0h
The Federal Information Processing Standard (FIPS) 140-2 is a U.S. government computer security standard used
to accredit cryptographic modules. FIPS enabled DS3578 digital scanners and cradles offer this secure mode of
operation.
To enable the FIPS mode of operation (enabled by default), scan the Enable FIPS bar code. The digital scanner
will attempt to establish a secure session with the cradle to which it is connected. On success, the digital scanner
will light a yellow LED on every trigger pull to signal that all data will be transmitted over Bluetooth in a secure
fashion. On failure, the digital scanner will sound transmission failure error message on every attempt to transmit
data.
To disable the FIPS mode, scan the Disable FIPS bar code at any time.
Enable FIPS
(01h)
*Disable FIPS
(00h)
To Next Page
Loading...
