Symbol DS3578 - GS1 Databar Expanded; Convert GS1 Databar to UPC;EAN

13 - 66 DS3578 With FIPS Digital Scanner Product Reference Guide
GS1 DataBar Expanded
Parameter # F0h 54h
Convert GS1 DataBar to UPC/EAN
Parameter # F0h 8Dh
This parameter only applies to DataBar-14 and DataBar Limited symbols not decoded as part of a Composite
symbol. Enable this to strip the leading '010' from DataBar-14 and DataBar Limited symbols encoding a single zero
as the first digit, and report the bar code as EAN-13.
For bar codes beginning with two or more zeros but not six zeros, this parameter strips the leading '0100' and
reports the bar code as UPC-A. The UPC-A Preamble parameter that transmits the system character and country
code applies to converted bar codes. Note that neither the system character nor the check digit can be stripped.
*Enable GS1 DataBar Expanded
(01h)
Disable GS1 DataBar Expanded
(00h)
Enable Convert GS1 DataBar to UPC/EAN
(01h)
*Disable Convert GS1 DataBar to UPC/EAN
(00h)