Symbol DS3578 - Data Matrix; Data Matrix Inverse

13 - 72 DS3578 With FIPS Digital Scanner Product Reference Guide
Data Matrix
Parameter # F0h 24h
To enable or disable Data Matrix, scan the appropriate bar code below.
Data Matrix Inverse
Parameter # F1h 4Ch
This parameter sets the Data Matrix inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular Data Matrix bar codes only.
• Inverse Only - the digital scanner decodes inverse Data Matrix bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse Data Matrix bar codes.
*Enable Data Matrix
(01h)
Disable Data Matrix
(00h)
*Regular
(00h)
Inverse Only
(01h)
**Inverse Autodetect
(02h)
NOTE *The Data Matrix Inverse default is Regular for the SR and HD configurations.
**The Data Matrix Inverse default is Inverse Autodetect for the DP configuration.