Accessories 2-27
7. In the ActiveSync window, select File - Connection Settings, the Connection Settings window appears.
8. Select the appropriate COM port for the host computer.
Figure 2-34. Serial Connection Setting
9. Tap OK to save any changes made.
Every mobile computer should have a unique device name. Never try to synchronize more than one mobile
computer to the same name.
10. Connect the device to the host computer. See Figure 2-1 on page 2-4 to set up a Single Slot Serial/USB cradle, or see Figure
2-12 on page 2-14 for cable connections.
The cradle requires a dedicated port. It cannot share a port with an internal modem or other device. Refer to
the host computer documentation to locate the serial port(s).
11. Upon connection, synchronization occurs automatically.
To Next Page
Loading...
