ActiveSync 3-5
3. Select the appropriate check box for the type of connection used.
4. Select the Show status icon in Taskbar check box.
5. Select OK to save any changes made.
Setting up a Partnership
After ActiveSync installation is complete, the ActiveSync Setup Wizard sets up a partnership to synchronize information between the
mobile computer and host computer and customize synchronization settings.
To set up a partnership:
1. Connect the mobile computer to the host computer using an accessory described in Chapter 2, Accessories.
2. If the Get Connected window does not appear on the host computer, select Start - Programs - Microsoft ActiveSync - File -
Get Connected.
Figure 3-4. Get Connected Window
3. On the host computer, select Next in the Get Connected window.
4. The host computer and the mobile computer attempt to synchronize. The New Partnership window appears.
Figure 3-5. New Partnership Window
To Next Page
Loading...
