SYMC BC360 User Manual

17
 Recycle mode batching process
In this batch mode terminal feeding then Dump each material one by one, batching process
includes 4 steps. And the whole cycle can be configured to work in 4 running modes.
Batching mode four
auto feeding/ auto Dump
F6.6=0/F6.7=0）
Batching mode two
auto feeding/semi-auto Dump
（F6.6=0/F6.7=1）
Batching mode two
semi-auto feeding/auto Dump
（F6.6=1/F6.7=0）
Batching mode one
semi-auto feeding/semi-auto Dump
6.6=1/F6.7=1）
Batching process
FEED1/Dump
Material 1
FEED1 FEED2 FEED3 FEED4
RUN
Material 2
Material 3
Material 4
FEED2/Dump
FEED3/Dump
FEED4/Dump
FEED1 Dump
FEED2 Dump
FEED3 Dump
FEED4 Dump
Dump
Dump
Dump
Dump
Recycle mode batching process
Weight data change as below (indicator display N.W. when batching.)
 Batching mode 1 (semi-auto feeding / semi-auto Dump)
Display menu list
Press [Select] to enter into following menu.
G.W
slow
fast
Material 1
Material 2
material 3
Material 1 N.W.
Material 2 N.W
Material 4 N.W
material 4
Material 3 N.W

SYMC BC360 Specifications

General

Brand	SYMC
Model	BC360
Category	Measuring Instruments
Language	English