SECTION II- USER KEY OPERATIONS
17
SECTION II - USER KEY
OPERATIONS
User Key FMU Configuration
The system types that utilize User keys are COM (Commercial) systems
which have one of the following key configurations: User-Key, Either Key
or Two-Key; and the VVID (Verified Vehicle ID) systems.
User Key systems are designed to provide accounting information
associated with a User’s fuel activities which may involve one or more
vehicles.
User Key System Procedures
If the odometer/chronometer feature is enabled, note
the current odometer/ chronometer reading before
getting out of the vehicle.
The FMU display screen displays the following prompt:
** FUELMASTER FUELS ACCOUNTING SYSTEM **
** INSERT KEY, HOLD 1 SECOND TO BEGIN **
NOTE:
If your system is equipped with a credit card reader, the following prompt is used
instead of the prior prompt as the FMU’s default prompt:
** FUELMASTER FUELS ACCOUNTING SYSTEM **
** INSERT KEY OR CARD TO BEGIN **
Either of these messages indicates that the FMU is available for use. Insert the
ProKee® into the ProKee® receptacle. Press it in and hold it there until the
display screen on the FMU changes to the next prompt (approximately one
second).
If the PIN option is enabled on the system, the following prompt appears:
To Next Page
Loading...