Syn-Tech Systems FuelMaster Plus - CONFIG > MODIFY > PUMPS > ELEC ADDR, BLEND, AIM IDS; Section VII: Supervisor Key Access (Continued); CONFIG > MODIFY > SYSTEM

SECTION VII - SUPERVISOR KEY ACCESS
49
CONFIG > MODIFY > PUMPS > ELEC ADDR
Set the address for each electric pump. Press the ‘A’ key to scroll
through each pump and press ‘B’ to increment or ‘C’ to decrement the
value.
CONFIG > MODIFY > PUMPS > BLEND
Select blending ratios among grades in an electronic pump. Must first
have an electronic pump configured to use this option.
CONFIG > MODIFY > PUMPS > AIM IDS
Specify the AIM ID for a pump. Press ‘A’ to scroll through a list of
available pumps then use ‘B’ and ‘C’ to specify the value for the AIM
nozzle ID (range of 0-233).
CONFIG > MODIFY > SYSTEM
CONFIGURE: A=NEXT, B=UP, C=DOWN, D=EXIT
<SYSTEM OPTIONS>
This menu allows the supervisor to assign information pertaining
the FuelMaster® system. These options include:
- SYSTEM: VALID KEY TIMER = (5-255 seconds)
- SYSTEM: MESSAGE DURATION = (1-10 seconds)
- SYSTEM: MODEM ANSWER BEGIN TIME = (0-24 hours)
- SYSTEM: MODEM ANSWER END TIME = (1-24 hours)
- SYSTEM: ZERO QUANTITY SHUTDOWN = (1-50)
- SYSTEM: JULIAN DATE CHANGE HR = (0-24 HOURS)
- SYSTEM: DEICAM PLACES IN QTY. = (1-3 DECIMAL PLACES)
- SYSTEM: TOTALIZER DIGITS (LEFT) = (5-8 DIGITS)
- SYSTEM: TOTALIZER DIGITS (RIGHT) = (1-3 DIGITS)
CONFIG > MODIFY > SHOW OPTIONS
Selecting Option C from the Configuration submenu provides the
opportunity to view the System Options as they are currently configured
on the system while positioned at the FMU.