SECTION VII - SUPERVISOR KEY ACCESS
55
CONFIG > TIME/DATE
Option C on the Configuration menu provides the opportunity to set the
time, date and day of the week settings stored in the FMU.
TIME/DATE MENU: <time> <date> <day of week>
A=TIME, B=DATE, C=DAY OF WEEK, D=EXIT
NOTE:
If the site has satellites, only the master FMU’s time/date needs to be set.
Daylight savings time adjustments require time resets using this menu option.
SUPERVISOR ISSUES MENU:
* SUPERVISOR ISSUES MENU *
* A=MANUAL, B=MODE, C=PUMPS, D=EXIT *
With the Issues menu is selected, the supervisor may dispense fuel (similar to
manual issue key), modify hose or hoses into or out of semi-manual mode
(factory set option has wiring requirement), or take hoses out of service or return
them to service. (Hose has been shutdown. Contact Supervisor.)
ISSUES > MANUAL
By selecting Option A on the Supervisor Issues submenu, the holder of the
supervisor key has the ability to start a Manual Issue fueling transaction at the
FMU by entering a User ID and Vehicle ID on the keypad. Five attempts to
enter an authorized User ID are provided. The Vehicle Id is not validated.
ISSUES > MODE
* MODE MENU *
* A=SEMI-MANUAL, B=MONITOR D=EXIT *
ISSUES > MODE > SEMI-MANUAL
Semi-Manual mode is an operational setting in which one or more hoses
may be placed in semi-manual mode at a time. This option requires
To Next Page
Loading...