SECTION V- MANUAL KEY OPERATIONS
34
SECTION V- MANUAL KEY OPERATIONS
Manual Key System Procedures
While not the standard method of obtaining fuel from the
FuelMaster system, the Manual Issue Key can be useful in
allowing fueling at an automated fueling site for vehicles,
equipment, or visiting users that either: do not have an
assigned key or, have no continuing need for an assigned
key. The FMU prompts that are displayed when using this
type of key are broken down into two different groups: those
for the VMN system type and all other system types. Each of
the entries on the FMU keypad, regardless of system type, is
numeric.
VMN SYSTEM TYPE
When the MANUAL ISSUE KEY is inserted, the following
prompt appears:
***** FUELMASTER *****
ENTER USER ID --->
The USER ID entry is checked against an authorization list stored in the FMU.
Five opportunities are given to enter a valid USER ID. If, after five attempts, the
entry is not authorized, a message is sent to the on-site printer and the process
begins again. If the entry is a valid USER ID, the next prompt appears. This
same prompt is also displayed for all other system types.
ALL SYSTEM TYPES:
***** FUELMASTER *****
ENTER VEHICLE ID --->
NOTE FOR VVID SYSTEMS:
The new 2500 Series FMU has an additional system configuration option for
To Next Page
Loading...