Syn-Tech Systems FuelMaster Plus - CONFIG > MODIFY > PUMPS Menu & INITIAL; CONFIG > MODIFY > PUMPS > MECH & ELEC

SECTION VII - SUPERVISOR KEY ACCESS
48
press Option B and a prompt requests the new cumulative totalizer for the
selected pump. This value is not checked for accuracy.
CONFIG > MODIFY > PUMPS
PUMPS CONFIG: 1=INTITIAL, 2=MECH, 3=ELEC,
4=ELEC ADDR, 5=BLEND, 6=AIM IDS D=EXIT
This menu provides the opportunity to configure the system. Each
FuelMaster® unit can control up to eight hoses (A-H).
CONFIG > MODIFY > PUMPS > INITIAL
Modify pump number (1-99) and pump type (mechanical or electrical)
for each hose. Press the ‘A’ key to scroll through each item and use
the ‘B’ and ‘C’ keys to modify the value.
CONFIG > MODIFY > PUMPS > MECH
Modify settings for each mechanical pump. Press the ‘A’ key to scroll
through the settings for each pump. There must be at least one
mechanical pump configured.
- PRODUCT CODE
- TANK NUMBER
- PULSER DIVIDE RATE
- NO-PULSE TIMEOUT
- PUMP FINISH TIMER
- UNIT OF ISSUE
- USE PUMP HANDLE
- UNL
CONFIG > MODIFY > PUMPS > ELEC
Modify settings for each electric pump. Press they ‘A’ key to scroll
through the settings for each pump. There must be at least one
electrical pump configured.
- NO-PULSE TIMOUT
- PUMP FINISH TIMER
- UNIT OF ISSUE
- NO-PULSE TIMEOUT
- PUMP FINISH TIMER