SECTION VI - TANKER TRUCK OPERATIONS
38
SECTION VI - TANKER TRUCK OPERATIONS
Tanker Truck Procedures
The Tanker Truck Key is provided to account for inventory transfer of fuel from
an automated FuelMaster® site into a tanker truck’s storage tank. After fuel
transfer, the fuel becomes accountable to the tanker truck. If the tanker truck is
fitted with a 2500 Mobile FMU, fueling transactions can be uploaded to a fixed
site 2500 FMU or downloaded directly from the Central Controller PC through a
standard telephone line.
If the tanker truck is not fitted with a 2500 Mobile FMU, more detailed fuel
accounting may be obtained by logging and manually entering all tanker truck
fueling transactions into the Central Controller PC. (See the FuelMaster® Plus
User Guide for more details on Manual Entry of Transactions.)
The FMU screen displays the following default prompt:
** FUELMASTER FUELS ACCOUNTING SYSTEM **
** INSERT KEY, HOLD 1 SECOND TO BEGIN **
If your system is equipped with a credit card reader, the following prompt
replaces the prior prompt as the FMU’s default prompt:
** FUELMASTER FUELS ACCOUNTING SYSTEM *
* ** INSERT KEY OR CARD TO BEGIN **
This message indicates that the FMU is available for use. Insert the tanker truck
ProKee® into the ProKee® receptacle. Press and hold it there until the display
screen on the FMU changes to the next prompt (approximately one second).
*** FUELMASTER TANKER TRUCK ISSUE ***
If the PIN option is enabled, the following prompt appears:
***** FUELMASTER *****
ENTER P.I.N. --->
Enter the PIN (Personal Identification Number) of the Tanker Key on the FMU
To Next Page
Loading...