SECTION IV- TWO KEY OPERATIONS
29
** FUELMASTER FUELS ACCOUNTING SYSTEM **
** INSERT KEY OR CARD TO BEGIN **
USER KEY
If the PIN option is enabled, regardless of which key is inserted first, the
following prompt appears:
***** FUELMASTER ***
** ENTER P.I.N. --->
Enter the PIN (Personal Identification Number) of the key on the FMU
keypad. This number is assigned to the key when it is encoded and is a 4-
digit number that is unique to the key. If the entry is incorrect, an error
message appears, the error is logged on the on-site printer and the
process begins again. Once the PIN is entered correctly, the next prompt
appears.
If the first key inserted was the User Key, the following prompt appears:
** USER KEY HAS BEEN READ **
** SUCCESSFULLY! **
This prompt indicates that the User Key has been successfully read. In a
moment, another prompt appears.
** INSERT YOUR VEHICLE KEY **
** TO CONTINUE **
As soon as this prompt appears on the FMU display, the Vehicle Key may be
inserted. Insert the Vehicle Key and press it in until the next prompt appears.
NOTE:
Two errors commonly occur in this process:
1. Continuing to hold the User Key in long after it has been read
The FMU looks for the Vehicle Key but sees the User Key instead. This results in
an error message.
2. Inserting the User Key and then quickly inserting the Vehicle Key before
the FMU prompt appears.
To Next Page
Loading...