SECTION VII - SUPERVISOR KEY ACCESS
56
control wiring for "pump handle yes" and a configuration setting to be
made by STS personnel.
When semi-manual mode is enabled, the Auto/Manual mode switch must
be left in the auto position. Users may fuel without the use of Prokees®
by simply turning on the pump handle and dispensing fuel. At the end of
fueling the transactions are charged to the Supervisor Key which placed
the hose into Semi-manual mode and will have a transactions code (TC)
of ‘03’.
ISSUES > MODE > MONITOR
Enable or disable monitoring a pump. With monitor mode turned on for a
pump, the FuelMaster® will keep track of how much fuel is being
dispensed for a particular pump and creates a transaction at midnight.
ISSUES > PUMPS
* SUPERVISOR HOSES MENU: 1=SET PRICING *
* A=SHUTDOWN PUMP, B=REENABLE, D=EXIT *
ISSUES > PUMPS > SET PRICING
PRICING: 1=PRINT,2=VIEW/MODIFY EXISTING,
A=ADD NEW PRICES,B=DELETE PRICES,D=EXIT
Selecting this option enables the supervisor to view, modify, add, or set
hose prices appropriate for the product being dispensed from each hose.
ISSUES > PUMPS > SHUT DOWN PUMP
This option enables the supervisor to remove a hose from service. Anyone
attempting to fuel with a hose which has been shut down will see the
message “Hose has been shut down. Please alert supervisor.”
ISSUES > PUMPS > REENABLE
By selecting this option, the supervisor is able to re-enable previously
shutdown hoses.
To Next Page
Loading...