SECTION VII - SUPERVISOR KEY ACCESS
50
SYSTEM OPTIONS: A=NEXT, B=PREVIOUS, D=EXIT
<SYSTEM OPTIONS>
Press the ‘A’ key to scroll through the following list in order to view each
corresponding setting.
System Key Type VMN, VVI, COM, Keyless, etc
Custom System Option Enabled/Disabled
Entered Vehicle ID’s Are: Numeric/Alphanumeric
Semi-Manual mode Enabled/Disabled
Real Gate transaction Enabled/Disabled
Power fail check Enabled/Disabled
Entered user id’s are: Numeric/Alphanumeric
Furnace monitor Enabled/Disabled
Using old ProKees® Enabled/Disabled
Show ProKee® ID Enabled/Disabled
Confirm ProKee® ID Enabled/Disabled
Display Pump Pricing Enabled/Disabled
EIU 2 Key (which keys are used) User, Vehicle, Both, None
Two Relays Per Pump Enabled/Disabled
Auto-activate Single Pump Enabled/Disabled
Modem Connect Speed 300, 1200, 2400, 9600, Max.
Tank Monitor Interface Enabled/Disabled
TMU Interface Type 7E1, 8N1, 7O1, etc
TMU Baud Rate 300, 1200, 2400, 9600, etc.
Receipt Printer Enabled/Disabled
Print Receipts on Power Fail Enabled/Disabled
Receipt Always Enabled/Disabled
Receipt Printer Type Pedestal or Indoor
Receipt Paper Cut Full or Partial
Receipt Baud Rate 300, 1200, 2400, 9600, etc.
To Next Page
Loading...