SECTION III- EITHER KEY OPERATIONS
27
This authorization prompt appears if the FMU configuration is set to Pump
Handle Detect - NO. It does not matter when the pump handle is turned on.
When this message appears, the FMU is ready to track fueling.
<<< TURN ON PUMP HANDLE TO DISPENSE >>>
<<< THE SELECTED PRODUCT >>>
This authorization prompt appears if the FMU configuration is set to detect the
pump handle. It indicates that the FMU is ready to watch for the pump handle to
be turned on.
The following prompt indicates the status of the dispenser hose:
>>> DISPENSER HAS BEEN ACTIVATED <<<
>>> RETURN HOSE AFTER USE <<<
When the FMU sees the pump handle turned on, it responds with the above
message and is ready to track fueling.
** PUMP HANDLE NOT TURNED OFF **
** PLEASE TURN PUMP HANDLE OFF! **
If the above message appears, the pump handle selected was already in the
‘ON’ position at the time this handle was selected. To begin fueling with this
pump handle, first reset the pump handle to the ‘OFF’ position and wait for the
prompt to turn it on to begin fueling.
To Next Page
Loading...