INTRODUCTION
9
conduct a fueling transaction.
Section II User Key: The FuelMaster® system using a User key.
Section two also covers the prompts a user will follow to
conduct a fueling transaction.
Sections III-IV Either-Key: These sections cover the Commercial Systems
options of operating the FuelMaster® using user and/or
vehicle keys.
Section V Manual Issue: This section covers the use of the Manual
Issue (M) key and its operation.
Section VI Truck key: This section covers the use of the Lube Truck
(T) key and its operation by the lube truck operator.
Section VII Supervisor Key: This section covers the (S) Supervisor's
key and its many menus on the FuelMaster® unit. It is used
for configuration of the FMU, displaying odometer readings
from a vehicle key, updating odometer readings, and
performing various diagnostic testing.
Section VIII This section is a troubleshooting guide used to identify FMU
generated error messages and with an explanation of each,
and a step-by-step guide to solve minor problems at the fuel
island.
Troubleshooting should be done in conjunction with
Syn-Tech Systems Customer Satisfaction Center (CSC)/
Product Support.
To Next Page
Loading...
